Xtool X100 Pad 2 battery problem solutions


xtoolstore-x100pad2-battery-problem-solution.xlsx  (11.0M)

This article aimed to solve the battery problems with the X100 pad 2 series.
Recently, we received some feedback from our customer about the X100 Pad 2 series battery problem. If your X100 pas can't boot up, you can try this way.

The Xtooltech engineer finally solved the problem:

Tools required: 

Static bracelet
Hot air gun (Temperature set up: 350±10℃)

Here are the procedures: 

Precautions:Please wear the static bracelet before the operation

1. Disassemble the C6 capacitor and desolder a 4.7K 0603 resistor.  Figure 1

Figure 1-1
                                                                                 Figure 1-1

Figure 1-2
                                                                                Figure 1-2

Figure 1-3
                                                                                    Figure 1-3

2. Disassemble the Q14 transistor. Figure 2

Figure 2-1
                                                                        Figure 2-1

Figure 2-2
                                                                              Figure 2-2

3. Replace the C123 capacitor witth a 3.3K%5  0402 resistor. Figure 3

Figure 3-1
                                                                        Figure 3-1

Figure 3-2
                                                                                      Figure 3-2